PORSCHE 911 TURBO SHIPPING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Kit includes:
Software fastload, sport air filter, FVD race exhaust system,
Headers with 200 cell catalytic.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 320kw (435hp) @ 7500rpm
Max. Torque - 430nm (317lbf ft) @ 5500rpm
Max. Speed - 320km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.0s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while r...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,844.40
Make a selection
FVD "brombacher" level 1 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software and a bmc sport air filter+ sport muffler set and x-cross pipe
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,5:1
Max. Power - 254kw (345hp) @ 6500rpm
Max. Torque - 390nm @ 4400rpm
Max. Speed - 300km/h (186mph)
Max. Rpm - 7500rpm
Acceleration 0-100km/h (0-60mph) - 4.8s
FVD level 1 tuning:
Max. Power - 272kw (370hp) @ 6500rpm
Max. Torque - 410nm @ 4500rpm
Max. Speed - 305km/h (191mph)
Max. Rpm - 7700rpm
Acceleration 0-100km/h (0-60mph) - 4.5s
For 25 years, FVD-Brombacherhas been setting the standard for Porsche tun...(choose a part on the right to read more)
General Fitment 911 2009-12
$4,574.90
Make a selection
Set
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), 968cs (93-95), 968 (92-95), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94), turbos (88-91), turbo (86-88), 944s2 (89-91), 944s (87-88), 944 (82-89), turbo (79-84), Carreragt (81-81), 924s (86-88), 924 (76-85), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 924 1980-85 911 1970-73
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3800ccm
Compression ratio - 9,8:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 650nm (479 lbf ft) @ 1950-5000rpm
Max. Speed - 312km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 419kw (570hp) @ 6000rpm
Max. Torque - 770nm (568lbf ft) @ 3000-4000rpm
Max. Speed - 320km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
Whether your vehicle is heavily modified or completely stock, FVD-Brombacherwill custom tune our programming to suit individual requirements. While we are able to modify a program based on individual needs, FVD-Brombachertunes Porsche ecu's with the following modifications in mind:
-inc...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,912.90
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3800ccm
Compression ratio - 9,8:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 650nm (479 lbf ft) @ 1950-5000rpm
Max. Speed - 312km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 456kw (620hp) @ 6000rpm
Max. Torque - 810nm (597lbf ft) @ 3500rpm
Max. Speed - 330km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.3s
Whether your vehicle is heavily modified or completely stock, FVD-Brombacherwill custom tune our programming to suit individual requirements. While we are able to modify a program based on individual needs, FVD-Brombachertunes Porsche ecu's with the following modifications in mind:
-incr...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$6,301.90
Make a selection
+ 15 crank hp & + 15 crank torque gain!
- a simple handheld obd2 tool is provided to flash your Cayenne conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehensively tested on the autobahn and under daily driving conditions.
- all of the OEM engine software safety features are fully intact and not disabled.
- customizable for your needs (larger turbo chargers, exhausts, intercoolers, etc.).
FVD vs. The competition
- removal of the computer from the vehicle to be sent out for reprogramming is not necessary!
- our software accommodates 91-100 octane automatically (adjusts timing and knock sensors all t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,921.54
Make a selection
Stainless steel brake hoses are the best way to transmit hydraulic pressure from your foot to your brake calipers with maximum efficiency and durability. When you step on the brakes with normal rubber brake hoses they first start to expand before you achieve maximum stopping power, resulting in a spongy feel.
Our stainless steel brake hoses do not expand, therefore eliminating the spongy feel and providing you with a solid brake pedal and maximum stopping power.
Our brake hose set contains:
4 x stainless steel brake hoses
1 x installation instructions
1 x tÜv-certificate
When replacing the brake hoses, the brake fluid must be replaced!
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (...(choose a part on the right to read more)
General Fitment 911 1994-98
Roof skin for racing cars
- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon mat
- adhesive mounting technology
Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.
Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300kw (10-), c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$3,518.90
Make a selection
Shorten the shift throw by 40%
- made from heat-treated alloy steel.
- made in Germany
Techtip:
Not for 993 turbo or all wheel drive models.
Models from 1989 to 1991 need transmission tunnel modification.
Fits: cup-race (94-98), rs (95-96), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c2 (90-94)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98 911 1989-94
Gurtrohr nur in verbindung mit bügel/käfigneubestellung möglich
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-02), 2.5 (97-99), 968cs (93-95), 968 (92-95), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 BOXSTER 1997-04 968 1992-95 911 1989-94 CAYENNE 2007-10 CAYENNE 2003-06 944 1982-85 944 1985-88 928 1992-95 924 1980-85 914 1970-76 911 1970-73 356 1960-65
Speedart turbo-look front bumper Porsche 996 Carrera 01-05
Turbo - look - front bumper for all Porsche 996 Carrera with large aerodynamic - front - chin - spoiler. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment 911 1998-05
$2,425.94
Make a selection
Speedart turbo-look chin spoiler Porsche Boxster 986 97-04
Front chin spoiler fits on all 996 turbo/4s and 996/Boxster with turbo-look bumper from speedart. The spoiler is designed to fit in the OEM location. It attaches by snapping into the stock holes on the bumpers where teh traditional front lip is mounted. This lip is made of a hard urethane to withstand slight impacts. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment BOXSTER 1997-04 911 1998-05
$1,506.59
Make a selection
Speedart turbo-look rear bumper Porsche 996 98-05
This is an orignal equipment piece direct from Porsche that has been modified by speedart in Germany to fit the narrow body. Additional hardware is included to ensure the fitment of the piece is secure and stable at high-speed. The exhaust tips must be replaced with c4s versions. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment 911 1998-05
$2,732.39
Make a selection
Speedart rs front lip spoiler Porsche 997 turbo
Speedarts optimized front lip spoiler fits to oe bumper. Has a very sportive design and more downforce. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment 911 TURBO/GT2 2007-09
$2,286.89
Make a selection
The 997 turbo vtg turbo upgrade is very affordable and delivers a nice upgrade to the 997 turbo. We have included the basic price for the upgrade here if you mail in your turbos for modification. Below is a selection of modifications you can choose from to build your vehicle with some or all of the performance parts you need to complete your 997 turbo.
Vivid racing's modified vtg turbochargers are capable of 700+ horsepower with additional modifications and tuning. This listing is for the turbo modifications only. It requires your cores to be sent in to vivid racing to be modified. We take the factory vtg turbochargers and rebuild them with a new turbine wheel that flows almost 40cfm more then stock. Th...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$4,725.00
Make a selection
Speedart GTS front bumper Porsche 996 Carrera 02-05
Gts-frontbumper with integrated front chin spoiler. For all 996 Carrera with facelift (mod. 2), c4s and turbo. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment 911 1998-05
$3,038.84
Make a selection
944 (82-89)
944s (87-88)
944s2 (89-91)
944cup (86-89)
Turbo (86-91)
Turbos (87-88)
968 (92-95)
968cs (93-95)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 944 1982-85 944 1985-88 944 1989-91 968 1992-95
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
Whether you are replacing an original or building a clone, this is a perfect reproduction of the factory GT2 front spoiler lip. It is manufactured in Germany and is made of gfk (glass fiber komposite). This will allow much greater downforce on the front end to keep the nose planted at speed. Professional installation recommended. Only works on cars with the wide body or turbo front bumper.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $695.00
Make a selection
This is a genuine Porsche mo30 / turbo front sway bar. It is 22 mm thick and includes the mo30 / turbo bushings. Perfect as a replacement or for a street able upgrade over the standard 20 mm front sway bar. Sold individually. 1 needed per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $647.34
Make a selection
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Please note: if you are installing these on a 928, body work will be required. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once order...(choose a part on the right to read more)
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipp...(choose a part on the right to read more)
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 15 crank hp & + 13 crank torque. - 2 3/4 tubing (70mm) for maximum power. - weighs 6.61 lbs. (3 kg). - catalytic look. - German v...(choose a part on the right to read more)
General Fitment 911 1989-94
From $470.80
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume high flow cat. - exhaust hange...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,675.37
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|